Buy Used Mini Cooper

Hayabusa Turbo

Will a STOCK zx14 or hayabusa engine be able to handle the power of turbo or nos or must there be modification?

no matter what? just wondering, not trying to kill myself!

i think they could handle it to an extent. I'm sure the place that sells/installs the nos or turbo will tell you the limits.

Hayabusa $11.99 Hayabusa

Turbo $10.49 Turbo

Icon Liner for Airframe Hayabusa Helmets - 15mm 01340896 $30 Replacement liner for Icon Airframe Hayabusa helmet

Icon Liner for Airframe Hayabusa Helmets - 12mm 01340897 $30 Replacement liner for Icon Airframe Hayabusa helmet

Icon Liner for Airframe Hayabusa Helmets - 15mm 01340898 $30 Replacement liner for Icon Airframe Hayabusa helmet

Icon Liner for Airframe Hayabusa Helmets - 12mm 01340899 $30 Replacement liner for Icon Airframe Hayabusa helmet

Icon Liner for Airframe Hayabusa Helmets - 12mm 01340900 $30 Replacement liner for Icon Airframe Hayabusa helmet

Icon Liner for Airframe Hayabusa Helmets - 9mm 01340901 $30 Replacement liner for Icon Airframe Hayabusa helmet

Icon Liner for Airframe Hayabusa Helmets - 7mm 01340902 $30 Replacement liner for Icon Airframe Hayabusa helmet

Icon Liner for Airframe Hayabusa Helmets - 7mm 01340903 $30 Replacement liner for Icon Airframe Hayabusa helmet

Icon Cheek Pads for Airframe Hayabusa Helmets - 25mm 01340893 $30 Replacement cheek pads for Icon Airframe Hayabusa helmet

Icon Cheek Pads for Airframe Hayabusa Helmets - 35mm 01340888 $30 Replacement cheek pads for Icon Airframe Hayabusa helmet

Icon Cheek Pads for Airframe Hayabusa Helmets - 30mm 01340889 $30 Replacement cheek pads for Icon Airframe Hayabusa helmet

Icon Cheek Pads for Airframe Hayabusa Helmets - 30mm 01340890 $30 Replacement cheek pads for Icon Airframe Hayabusa helmet

Icon Cheek Pads for Airframe Hayabusa Helmets - 25mm 01340891 $30 Replacement cheek pads for Icon Airframe Hayabusa helmet

Icon Cheek Pads for Airframe Hayabusa Helmets - 30mm 01340892 $30 Replacement cheek pads for Icon Airframe Hayabusa helmet

Icon Cheek Pads for Airframe Hayabusa Helmets - 20mm 01340894 $30 Replacement cheek pads for Icon Airframe Hayabusa helmet

Icon Cheek Pads for Airframe Hayabusa Helmets - 20mm 01340895 $30 Replacement cheek pads for Icon Airframe Hayabusa helmet

Hayabusa GSX1300R Lever $149.95 RC Components Hayabusa GSX1300R Lever Made from high-quality billet aluminum and then chromed for an eye-catching finish Enhances the look of your bike CNC-machined and quality tested to ensure the finest product possible

Ghost Rider 500Bhp Suzuki Hayabusa Turbo

Motorcycles Q&A

700+ horsepower from a hayabusa ?
i heard roughly speaking this from a friend, it used a NLR turbocharger. anyone know anything about it ? and where on earth can i get it done ?

70cc upgrade paraphernalia?
I need info on where on earth to find an upgrade kit for a 1982 honda urban express... also if I bring a larger cylinder I'm guessing I would need different roller weights also, what would I want to do? do I need to mess beside the...

750 Vulcan grasp spark once when first turn on ignition and next nutin... minister to!! I wanna ride?
I was riding along and it be working fine, it was a touch rainy but not too much, it started missing on one cylindar and I realize I needed gas. I filled up and it run on only one or two cylindars, mundane for this bike for...

78hondacb400a no spark?
Have power to coil but no spark. tried diffrent coil,wires,plug. good battery-operated.

80cc bore kit will disrupt your ped?
hi, i have a Piaggio nrg power and be gunna get a 80cc big bore apparatus but after reading some stuff off the internet it be saying how it would desecrate the engine in a shorter time? is this true or is it a short time...

81 650 yamaha saying clutch question have need of the torque settings,?
i took the clutch plates off the motor , but i dont enjoy the torque specs of the bolts that hold on the clutch plates, they had lock tight i guess .. the spring behind the nuts cant be tighted adjectives the way down right? ...

81' Yamaha Maxim engine restructure?
I have and 81' Yamaha Maxim 650. i bought it for fifty dollars. theres rust and hose down in the cylinders, how thorny would it be to clean up, if it would run right after i did? how much would it cost? would it be worth the...

81 yamaha xs850sh backside shocks?
I have an 81 yamaha xs850sh, one of the flipside shocks failed. I can't find the alien one (discontinued). I have to buy an aftermarket set (left and right). What kindly of shocks would do the same duty? I'm not lokking for high recitation, as long as...

82 honda atc: 2 drain plugs. one is for grease but what is the other one for?
also how do you fill the second one?

83 kz650 starter clutch problem?
When starting there is a grinding nouns and motor will not turn over. It will not push start either. I be told it would be the starter clutch, but after taking apart i found there are two allen bolts on the starter clutch that are finger tight....

84-85 Honda Shadow Problems??
Alright. My dad has a 84-85 honda shadow that works really powerfully. All except for the shifting/transmission part. When I rode it, the article woulnd't shift down easily. You have to hit it down a couple times and then it would shift. ...

85 zx600, wont shift out of first, turn bike sour and it shifts out.?
clunks into first, noise when surrounded by nutral ,pull clutch within noise go away

86 goldwing1200 charging problems?
my friends goldwing has a moment ago had the stator replaced and hardwired around the stator plug but it still isnt charging above around 11.4 at highway speed. i'm thinkingmaybe rectifier?

88ci Shovelhead go kapow...?
I had an engine built on S&S big bore cases, stock flywheels and conn rods, JIM's shafts, KB pistons and CCI 3 5/8 cylinders, JIM's lifters, Andrews B cam etc, etc.. I have just over 500 miles on it when...here I was...cruising down the hiway...tick, tick,...

89' suzuki 600 starts but wont run?
it will start but you have to keep hold of it at about 2000 rpm to hang on to it running and when you try to ride it it wont rev above 7000 to 8000 rpm and runs hot even with cooling adherent any help would be...

8OO-1000 hp hayabusa turbo?
i was looking around and found a article around a 700 bhp busa. i didnt believe it so i researched it and found only alike article so i asked some said it was impossible some said it can be done, resourcefully i just found this ...

90 Ninja, salvage title - should I risk it?
I found an offer for a '90 black Kawasaki Ninja. It's be in an misfortune, and became a salvage title. The mechanic repaired the bike for $700, and it is now for mart only for cost of repairs. Is this other? I just looked-for a bike for...

92 Kawasaki KDX 125, Flooded engine? wont turn over?
I was riding my bike and be going fine then it stopped and i repetitivly tryed starting it again untill i figered i have ran out of the 2stroke self mix grease, i then complete it up to the full level and tryed to start it...

93 katana next to 45000 miles on it .?
what is this this piece worth?

93 Ninja what it`s worth?
I own a 1993 Ninja 600R with 1,300 miles, black and purple beside a purple neon kit, is surrounded by excellrnt condition and was storred for a few years, i`m currantley getting it contained by running condition, any ideas what it might be worth, similar to...

'93 Yamaha Seca II - Idles soaring?
I recently bought my first bike and own noticed that after riding for around 15-20 minutes, when I come to a stop (stop sign) and have clutch lever pulled contained by (engaged) the bike idles 2,000 - 2,500 rpms and seem jumpy. If I take...

94 Honda 4wd spit and puttering.??
My 300 honda starts spittin and sputtering on high rpm. It idles and runs great, but when i be in motion up a hill in second gear it's resembling it starts missing so bad the fourwheeler bogs down and i have to progress down to 1st...

95 zx6r help out?
MY 95 ZX6R DOESNT RUN THE SAME AFTER I PRIMED THE FUEL PUMP AND I THOUGHT MAYBE THE FUEL PUMP WAS BAD BUT I REPLACED IT SAME PROBLEM. IT BIKEFIRES AND WHEN I HIT THE THROTTLE IT FEELS LIKE ITS GONNA DIE. WHEN I...

95 chevy pick up does not receive to 195 operating temp?
new thermostate, spanking new fan clutch. actual temp is 162...taken beside a laser temp gun. 350 engine, 5 speed standard...

95 Ninja 600cc will not fire.?
I have a 95 600cc Ninja that cranks, but will not fire. I don't ruminate it's the coil. What else could it be, and how much is it going to cost to fix?

95 Road King w/SS113 Engine, which HQ Cam would be best?
I have used the HQ-0024 on the ingenious 80 cu in,and really enjoy the sound (lope) and activities improvement. I want matching lope and performance on my SS113 Engine.

95 vt600 vlx. can i remove the fuel pump and gravity nurture directly from the container in need problem?
i bought this bike with 4000 mi on it . at hand was a fire beneath the seat that took out most of the electrical within that spot . i hav replaced all of the dog-eared parts , but the rear fender strut on the right side...

'95 Yamaha Timberwolf 250 flipside swing arm. How do you romve the pivot bolt after removing the nuts that safe and sound
Trying to replace the swing arm bearings, and requirement to know what to do next after taking stale the swing arm nuts and how to remove the rest of the assembly including the drive shaft

96 yamaha RT 100 is $600 a apt price?
runs good barlly riden starts up every time never do nothing to it mint!!

97' Suzuki Katana leak gas through the carb over flow?
so i have this 97' suzuki katana that have been leak through the over flow valve or vent spout near the fuel flash. it only does it when the engine is idle, as it would suck the fuel back down the tube when it's revved up. also...

More Motorcycles questions please visit : YesImAuto.com

About the Author

YesImAuto.com